BX-BLUSERVER is the easiest way to program complex logic in KNX/EIB, Modbus, BACnet networks.

BX-BLUSERVER will allow you to efficiently customise building automation processes, offering unlimited flexibility benefits to end users in a cost-effective way.

BX-BLUSERVER is an embedded platform with integrated Ethernet, USB, KNX/EIB, Serial interfaces. It can be used as a cross-standard gateway, logic engine, visualisation platform, IP Router.

Scripting templates provide a flexible and intuitive configuration interface and integration with cloud/web services and thirdparty devices. Through the application of customised scripts, the BX-BLUSERVER can simultaneously function as a thermostat, security panel, lighting controller, etc.

BX-DM05 is a 4-channel multifunctional actuator, with analog outputs in voltage, designed for DIN rail mounting. The device’s outputs can be configured and used independently, providing voltage commands to equipment dedicated to the regulation of heating, cooling, ventilation (HVAC) and also in the area of lighting. In addition to the KNX bus connection, the device requires an auxiliary DC power supply, from which the output voltage of the 4 channels is generated. The outputs will be controlled according to the chosen configuration and the commands given via the KNX bus. On the front of the module there are 4 buttons and 4 indicator lights dedicated to test and operation diagnostics, also on the front are the button for programming the physical address KNX and the LED that reports the status of the mode itself. The screw terminals can accommodate cables up to 5 mm2 in cross section. It provides for status notification, lockout command, forcing, timings, delays, scenarios.

KRONOS4 is designed to integrate all the functions necessary for the supervision of homes and buildings in general. The touch panel allows you to control any KNX system in a simple and intuitive way. Made with an elegant design, the 4" Knx smart touch panel has an aluminum frame and body only 9mm thick. Flush-mounted installation on a 2-module square box. The 4" KNX smart touch by Blumotix is equipped with a temperature, humidity and laser proximity detection sensor. The touch controller has 10 programmable pages in addition to the thermostat and fan coil function. Scenarios, dimmer, on-off switching, curtains, shutters, thermostat, conditions customizable climate settings. Laser detection sensor setting up to 120cm with switching objects and dimmer. The touch panel requires an additional 12-24V (<50mA) power supply.

Doory is an smart numeric keypad that serves as an access control system. The Doory numeric keypad is a glass KNX touch device, backlit and equipped with a proximity sensor. It is particularly suitable for hospitality establishments, as the glass can be customised with a room number and standard functions, typical of hotel services (do not disturb, make up room).The keypad provides management of room access via numeric code without the need for any other support. Combined with the numeric keypad there is a glass KNX touch panel, to be installed inside the room, for the activation of functions related to the keypad and in direct communication with the reception for emergency signals.The numeric keypad access control system can be integrated with the BMS BX -NEMO software, which can be interfaced with the main hotel management systems on the market, allowing the supervision and management of the hotel’s systems and all its accesses from a smartphone, tablet or traditional PC.

Universal KNX Blumotix dimmer actuator (RLC, LED, CFL) with 2 channels. BX-DUNIV is the dimmer capable of delivering up to 300 W at 230 V ac on each of the two available lines. The dimming curves can be configured to suit the type of light source used. Possibility of driving the lamps in two modes: “LE” Leading Edge, with start phase cut, and “TE” Trailing Edge, with end phase cut. The front panel features manual controls for adjusting the outputs.

BX-DUNIV is able to achieve low brightness, even with modern fluorescent lamps or LEDs, stabilises the brightness of energy-saving sources and solves unwanted side effects: buzzing, flashing, unstable operation.